TK-2000/3000
Slim, thin and light – KENWOOD’s TK-2000 is supremely easy to handle and to operate. Yet this handy compact radio is extremely reliable, meeting the famously tough MIL-STD 810 C/D/E/F and G specifications. With its well-balanced performance, it makes perfect business sense – especially for inventory control and service industry operations.
Thin & Lightweight
Thinner and lighter – the TK-2000 is ideal for hooking on a belt or even slipping into a coat pocket. The slim design fits neatly in your hand and it weighs only 203g with the Li-Ion battery.
16 Channels with Scan Function
This compact, user-friendly portable offers a total of 16 channels, and each can be assigned a QT and DQT tone key to eliminate unwanted signals. You can also assign the 16th channel, if free, to the scan function. This added convenience means that the PF key is freed up for some other function.
Programmable Function Key with Hold
The side PF key can be programmed for enhanced operating ease, while the adjustable Hold feature doubles the number of functions at yourfingertips.
UHF WIDE BAND COVERAGE
Offering extensive frequency coverage – 70MHz for UHF – the TK-2360/3360 can accommodate a wide range of applications, making it an ideal choice for rental businesses.
All-in-one Package
The TK-2000 is ready for use immediately after purchase. It comes with all necessary accessories, including a charger, battery pack and antenna. A handy belt clip is also provided. There is no need to buy extra accessories for normal operation.
Robust & Reliable
The TK-2000 is built to survive hard knocks, drops and all-weather environments. It meets or exceeds the stringent IP54 dust and water intrusion standards as well as the MIL-STD 810 C, D, E, F & G environmental standards.
other features
– Output Power 5W (VHF) / 4W (UHF)
– QT / DQT
– DTMF Enc. (PTT ID, Autodial)
– Priority Scan
– Windows® Programming and Tuning
– Wide/Narrow Channel Bandwidth
– VOX ready
– Battery-Saver
– Busy Channel Lockout
– Time-Out-Timer
– Low-Battery Alert
– Tri-Colour LED
– Wired Clone
General Features
– Thin & Lightweight
– 16 Channels with Scan Function
– Programmable Function Key with Hold
– All-in-one Package
– Robust & Reliable
– Output Power 5W (VHF) / 4W (UHF)
– QT / DQT
– DTMF Enc. (PTT ID, Autodial)
– Priority Scan
– Windows® Programming and Tuning
– Wide/Narrow Channel Bandwidth
– VOX ready
– Battery-Saver
– Busy Channel Lockout
– Time-Out-Timer
– Low-Battery Alert
– Tri-Colour LED
– Wired Clone
KNB-63L
Li-Ion Battery Pack (7.2V, 1,100 mAh)
KSC-35S
Regular Charger
KRA-22
VHF Low Profile Helical Antenna
KRA-23
UHF Low Profile Helical Antenna
KRA-26
VHF Helical Antenna
KRA-27
UHF Whip Antenna
KMC-45
Speaker Microphone
KMC-21
Compact Speaker Microphone
KHS-1
Headset with VOX/PTT
KHS-21
Headset
KWR-1
Water Resistant Bag
| GENERAL | |
|---|---|
| Frequency Range Type 1 Type 2 |
144 ~ 174 MHz – |
| Number of Channels | 16 channels |
| Channel spacing Wide / Narrow |
25 kHz / 12.5 kHz |
| Channel Step | 5, 6.25 kHz |
| Operating Voltage | 7.5 V DC ± 20% |
| Battery Life (5-5-90 duty cycle, save off) with KNB-63L |
Approx. 10 hours |
| Operating Temperature | -20°C to +60°C |
| Frequency Stability | 5 ppm |
| Antenna impedance | 50 Ω |
| Channel Frequency Spread | 30 MHz |
| Dimensions (W x H x D), Projections not included Radio Only with KNB-63L |
54 x 113 x 14 mm |
| Weight (net) Body only with KNB-63L |
Approx. 130 g Approx. 203 g |
| FCC ID Type 1 Type 2 |
ALH437200 – |
| FCC Compliance | Parts 15 / 90 |
| RECEIVER | |
| Sensitivity (12 dB SINAD) Wide / Narrow |
0.25 µV / 0.28 µV |
| Selectivity Wide / Narrow |
70 dB / 60 dB |
| Intermodulation Distortion Wide / Narrow |
65 dB / 60 dB |
| Spurious Response | 65 dB |
| Audio Distortion | Less than 5% |
| Audio Output | 500 mW / 8 Ω |
| TRANSMITTER | |
| RF Power Output High / Low |
5 W / 1 W |
| Spurious Response | 65 dB |
| Modulation Distortion Wide / Narrow |
16K0F3E / 11K0F3E |
| FM HUM & Noise Wide / Narrow |
45 dB / 40 dB |
| Audio Distortion | Less than 5 % |
Measurements made per TIA/EIA 603 and specifications shown are typical.
KENWOOD follows a policy of countinuous advancement in development.
For this reason specifications may be changed without notice.
FleetSync® is a registered trademark of KENWOOD Corporation.
Applicable MIL-STD & IP
| Standard | MIL 810C Methods/ Procedures |
MIL 810D Methods/ Procedures |
MIL 810E Methods/ Procedures |
MIL 810F Methods/ Procedures |
MIL 810G Methods/ Procedures |
|---|---|---|---|---|---|
| Low Pressure | 500.1/Procedure I | 500.2/Procedure I, II | 500.3/Procedure I, II | 500.4/Procedure I, II | 500.5/Procedure I, II |
| High Temperature | 501.1/Procedure I, II | 501.2/Procedure I, II | 501.3/Procedure I, II | 501.4/Procedure I, II | 501.5/Procedure I, II |
| Low Temperature | 502.1/Procedure I | 502.2/Procedure I, II | 502.3/Procedure I, II | 502.4/Procedure I, II | 502.5/Procedure I, II |
| Temperature Shock | 503.1/Procedure I | 503.2/Procedure I | 503.3/Procedure I | 503.4/Procedure I, II | 503.5/Procedure I |
| Solar Radiation | 505.1/Procedure I | 505.2/Procedure I | 505.3/Procedure I | 505.4/Procedure I | 505.5/Procedure I |
| Rain | 506.1/Procedure I, II | 506.2/Procedure I, II | 506.3/Procedure I, II | 506.4/Procedure I, III | 506.5/Procedure I, III |
| Humidity | 507.1/Procedure I, II | 507.2/Procedure II, III | 507.3/Procedure II, III | 507.4 | 507.5/Procedure II |
| Salt Fog | 509.1/Procedure I | 509.2/Procedure I | 509.3/Procedure I | 509.4 | 509.5 |
| Dust | 510.1/Procedure I | 510.2/Procedure I | 510.3/Procedure I | 510.4/Procedure I, III | 510.5/Procedure I |
| Vibration | 514.2/Procedure VIII, X | 514.3/Procedure I | 514.4/Procedure I | 514.5/Procedure I | 514.6/Procedure I |
| Shock | 516.2/Procedure I, II, V | 516.3/Procedure I, IV | 516.4/Procedure I, IV | 516.5/Procedure I, IV | 516.6/Procedure I, IV |
| International Protection Standard | |||||
| Dust & Water Protection | IP54 | ||||
To meet MIL810 and IP54, the 2-pin connector cover has to be connected.